PRODUCT CATEGORIES
Choose a system to continue
Start from the MEP system or structural form, then review the available model range. Product detail pages remain a separate next-stage migration.
Pipe Gallery Supports
Standard modular pipe-gallery supports — column frames, wall cantilevers, single/dual-pipe and multi-tier racks, tray and power/telecom supports, water and heating pipe supports, plant-room modules and adjustable anchor seats — selected by series and combined from the tables.
02 / SE-ACCSeismic Support Accessories
Standard seismic support accessories — channel, brace members, cantilever arms, rods, turnbuckles, pipe/duct/tray clamps, U-bolts, pipe shoes, spring isolators and fastener kits — selected by series and sized from the tables.
03 / SE-CABLECable Tray Seismic Supports
Standard cable-tray seismic support series — ladder/trough/channel trays, lateral/longitudinal/bi-directional braces, multi-tier, vertical inter-story, portal, wall-arm, elbow/tee nodes, long-span and heavy-duty braces — selected by series and sized from the tables.
04 / SE-COMBOMulti-Trade Seismic Supports
Standard multi-trade seismic support series — shared MEP racks, pipe+duct/tray, duct+tray, three-trade, tiered, corridor, plant-room, shaft, gravity/seismic separation, elbow/junction nodes and heavy shared braces — selected by series and sized from the tables.
05 / SE-CONNECTSeismic Connectors
Connectors, anchors and brace fittings for channel seismic assemblies.
06 / SE-DUCTDuct Seismic Supports
Standard HVAC duct seismic support series — rectangular lateral/longitudinal/bi-directional, round, insulated, smoke exhaust, shaft, portal, fire-damper and flexible-connector independent supports, elbow/tee nodes and heavy large-section braces — selected by series and sized from the tables.
07 / SE-CONDUITElectrical Conduit Seismic Supports
Standard electrical-conduit seismic support series — metal lateral/longitudinal/bi-directional, flexible conduit, parallel multi-conduit, risers, wall-arm, portal, panel feeds, tray transitions, elbow/box nodes and heavy multi-conduit braces — selected by series and sized from the tables.
08 / SE-FIREFire Protection Seismic Supports
Standard fire-protection seismic support series — hydrant mains and risers, sprinkler mains/distribution/end branches, alarm-valve nodes, loop bi-directional braces, portal mains, pump rooms, FDCs, elbow/tee nodes and heavy mains — selected by system and sized from the tables.
09 / SE-HEAVYHeavy Equipment Seismic Supports
Standard heavy-equipment seismic support series — chiller and pump bases, tanks, cooling towers, AHUs, fans, switchgear, heat exchangers, flex-connector side supports, isolator-compatible bases, stop/tie-rod kits and reinforced frames — selected by equipment and sized from the tables.
10 / SE-PORTALMulti-Pipe / Portal Seismic Supports
Standard multi-pipe / portal seismic support series — dual/triple lateral portals, longitudinal and bi-directional, tiered, floor-mounted and suspended, wide-span, mixed-size, corridor multi-service, elbow/tee nodes and heavy portals — selected by series and sized from the tables.
11 / SE-SINGLESingle-Pipe Seismic Supports
Standard single-pipe seismic support series — lateral hangers and portals, longitudinal and bi-directional braces, single/dual braces, riser braces, wall-arm, heavy, insulated and elbow/tee node braces — selected by series and sized from the tables.
12 / SE-WATERWater & Drainage Seismic Supports
Standard water and drainage seismic support series — domestic mains and branches, hot water, gravity and pressurized drainage, risers, portal mains, insulated lines, rainwater, elbow/tee nodes and heavy mains — selected by system and sized from the tables.